Journal Papers

2021

1. An abstract approach toward the structural digital twin of ship hulls: A numerical study applied to a box girder geometry. Proceedings of the Institution of Mechanical Engineers / K. Anyfantis / Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment / Part M: Journal of Engineering for the Maritime Environment. January 2021 / DOI:10.1177/1475090221989188

2. Static strain-based identification of extensive damages in thin-walled structures / Silionis N. and Anyfantis K. / Structural Health Monitoring, 2021, article in press / DOI: https://doi.org/10.1177/14759217211050605

3. Construction of surrogate models for predicting the buckling strength of stiffened panels through DoE and RSM methods / Papanikolaou N. and Anyfantis K. / Engineering Computations, 2021, article in press / DOI: https://doi.org/10.1108/EC-03-2021-0176

4. Buckling Strength Assessment of Composite Patch Repair Used for the Rehabilitation of Corroded Marine Plates / Kallitsis N. and Anyfantis K. / Applied Mechanics, 2021, 2(3):482-500 / DOI: https://doi.org/10.3390/applmech2030027

5. Dissimilar welding between conventional and high strength low alloy naval steels with the use of robotic metal cored arc welding / Marios Kazasidis, Dimitrios Pantelis, Francisca G. Caballero, Carlos Capdevila, Jonathan Cassidy, Elias Bilalis, Rocco Lupoi / The International Journal of Advanced Manufacturing Technology volume 113, pages2895–2907 (2021) / DOI: 10.1007/s00170-021-06819-8

2020

1. Ultimate strength of stiffened panels subjected to non-uniform thrust / K. Anyfantis / International Journal of Naval Architecture and Ocean Engineering 12, 2020, Pages 325-342 / DOI: 10.1016/j.ijnaoe.2020.03.003

2. Experimental and numerical study of CFRP reinforced steel beams / Kipriadis ME, Bilalis EP and Tsouvalis NG / Proc IMechE Part M: J Engineering for the Maritime Environment, 2020 / DOI: 10.1177/1475090220960266

2019

1. Preliminary design assessment of an alternative repair method for corroded shear panels in ship hull structures / K. Anyfantis / Ocean Engineering 188 106323 2019 / DOI: 10.1016/j.oceaneng.2019.106323

2. Evaluating the influence of geometric distortions to the buckling capacity of stiffened panels / K. Anyfantis / Thin-Walled Structures 140 2019, pp. 450-465 / DOI: 10.1016/j.tws.2019.03.057

3. An approach for the design of multi-material mechanical components / K. Anyfantis, P. Stavropoulos, P. Foteinopoulos, G. Chryssolouris / Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 233(3) 2019, pp. 960-974 / DOI: 10.1177/0954405418763995

4. Comparative study of structure and properties of thermal spray coatings using conventional and nanostructured hydroxyapatite powder, for applications in medical implants / P. Gkomoza, M. Vardavoulias, D. I. Pantelis, Ch. Sarafoglou, Surface and Coatings Technology, Volume 357, 15 January 2019, Pages 748-758 / DOI: 10.1016/j.surfcoat.2018.10.044

5. Microstructural investigation of porous titanium coatings, produced by thermal spraying techniques, using plasma atomization and hydride-dehydride powders, for orthopedic implants, P. Gkomoza, G. S. Lampropoulos, M. Vardavoulias, D. I. Pantelis, Ch. Sarafoglou, Surface and Coatings Technology, 357, 2019, pp. 947-956 / DOI: 10.1016/j.surfcoat.2018.10.072

2018

1. Experimental and numerical study of a composite-to-steel joint under bending and torsion loads / N. Kharghani; F. Alizadeh; C.G. Soares; N.G. Tsouvalis / Journal of Engineering for the Maritime Environment, Proceedings of the Institution of Mechanical Engineers, Part M, 2018. / doi:10.1177/1475090218782129

2. An Innovative Ship Salvage Concept and its Effect on the Hull Structural Response / I. Zilakos; E. Chatzidouros; N. Tsouvalis / Journal of Marine Engineering and Technology, 12 pages / doi:10.1080/20464177.2018.1508629

3. The role of SiC and TiC nanoparticle reinforcement on AA5083-H111 friction stir welds studied by electron microscopy and mechanical testing / P.N. Karakizis; D.I. Pantelis; G. Fourlaris; P. Tsakiridis / The International Journal of Advanced Manufacturing Technology, Vol. 94 (9-12), pp. 4159-4176 / doi:10.1007/s00170-017-1147-7

4. Manufacturing process of AA5083/nano-γAl2O3 localized composite metal foam fabricated by friction stir processing route (FSP) and microstructural characterization / I.G. Papantoniou; H.P. Kyriakopoulou; D.I. Pantelis; A. Athanasiou-Ioannou; D.E. Manolakos / Journal of Materials Science, Vol. 53 (5), pp. 3817-3835 / doi:10.1007/s10853-017-1802-2

5. Effect of SiC and TiC nanoparticle reinforcement on the microstructure, microhardness and tensile performance of AA6082-T6 friction stir welds / P.N. Karakizis; D.I. Pantelis; G. Fourlaris; P. Tsakiridis / The International Journal of Advanced Manufacturing Technology, Vol. 95, pp. 3823-3837 / doi:10.1007/s00170-017-1446-z

6. Effect of hydrogen on fracture toughness properties of a pipeline steel under simulated sour service conditions / E.V. Chatzidouros; A. Traidia; R.S. Devarapalli; D.I.Pantelis; T.A.Steriotis; M. Jouiad / International Journal of Hydrogen Energy, Vol. 43, pp. 5747-5759 / doi:10.1016/j.ijhydene.2018.01.186

7. Electrochemical impedance spectroscopy of scribed coated steel after salt spray testing / E.D. Kiosidou; A. Karantonis; G.N. Sakalis; D.I.Pantelis / Corrosion Science, Vol. 137, pp. 127-150 / doi:10.1016/j.corsci.2018.03.037

8. Fabrication of MWCNT-reinforced Al composite local foams using friction stir processing route / I.G. Papantoniou; H.P. Kyriakopoulou; D.I. Pantelis; D.E. Manolakos / The International Journal of Advanced Manufacturing Technology, Vol. 97, pp. 675-686 / doi:10.1007/s00170-018-1964-3

9. Application of Aluminium Flakes in Fabrication of Open-Cell Aluminium Foams by Space Holder Method / I.G. Papantoniou; A.P. Markopoulos; D.I. Pantelis; D.E. Manolakos / Materials 2018, Vol. 11(8), E1420 / doi:10.3390/ma11081420

10. Comparative study of toughness between the AH 40 fatigue crack arrester steel and its weld metal in the case of robotic metal-cored arc welding / M.E. Kazasidis; D.I. Pantelis; E.V. Chatzidouros; V.D. Bougiouri / doi:10.1007/s00170-018-2533-5

11. Fracture mechanics based assessment of manufacturing defects laying at the edge of CFRP-metal bondlines / K. Anyfantis, P. Stavropoulos, G. Chryssolouris / Production Engineering, 12(2) 2018, pp. 173-183 / DOI: 10.1007/s11740-018-0796-1.

12. Experimental and numerical study of the bolt reinforcement of a composite-to-steel butt-joint under three-point bending test / Kharghani N., Soares C.G., Tsouvalis, N.G. / Marine Structures, (63) 384-403 2018. (https://doi.org/10.1016/j.marstruc.2018.08.009).

2017

1. CFRP Reinforcement and Repair of Steel Pipe Elbows Subjected to Severe Cyclic Loading / I. Skarakis; G. Chatzopoulou; S.A. Karamanos; N. Tsouvalis; A.E. Pournara / Journal of Pressure Vessel Technology, ASME, Vol. 139 (5), 051403 / doi:10.1115/1.4037198

2. Rust morphology characterization of polyurethane and acrylic-based marine antifouling paints after salt spray test on scribed specimens / E.D. Kiosidou; A. Karantonis; D.I. Pantelis; E.R. Silva; J.C.M. Bordado / Journal of Coatings Technology and Research, Vol. 14 (6), pp. 1381-1395 / doi:10.1007/s11998-017-9939-0

3. Implementing optical fibres for the structural health monitoring of composite patch repaired structures / V.A. Karatzas; E.A. Kotsidis; N.G. Tsouvalis / Journal of Adhesion Science and Technology, Vol. 31, Issue 19-20: Mechanics of Composite Adhesive Joints and Repairs, pp. 2234-2250 / doi:10.1080/01694243.2017.1341728

4. Experimental and numerical investigation of AA6082-T6 thin plates welding using Concentrated Solar Energy (CSE) / D.I. Pantelis; P.N. Karakizis; M.E. Kazasidis; D.G. Karalis; J. Rodriguez / Solar Energy Materials and Solar Cells, Vol. 171, pp. 187-196 / doi:10.1016/j.solmat.2017.06.063

5. Experimental investigation of roughness effect on ship resistance using flat plate and model towing tests / E.D. Kiosidou; D.E. Liarokapis; G.D. Tzabiras; D.I. Pantelis / Journal of Ship Research, Vol. 61, No 2, pp. 75-90 / doi:10.5957/JOSR.61.2.160044

6. Rust morphology characterization of silicone-based marine antifouling paints after salt spray test on scribed specimens / E.D. Kiosidou; A. Karantonis; D.I. Pantelis; E.R. Silva; J.C.M. Bordado / Journal of Coatings Technology and Research, Vol. 14 (2), pp. 333-345 / doi:10.1007/s11998-016-9851-z

7. Microstructural and mechanical properties of dissimilar friction stir welds between AA6082-T6 and AA7075-T651 / N.M. Daniolos; D.I. Pantelis / The International Journal of Advanced Manufacturing Technology, Vol. 88, Issue 9-12, pp. 2497-2505 / doi:10.1007/s00170-016-8965-x

8. Parametric analysis of the stringer bead reinforcement area and prediction of the number of beads in a single-V butt joint, using the robotic Flux-cored arc welding technique / M. Kazasidis; D.I. Pantelis / The International Journal of Advanced Manufacturing Technology, Vol. 88, Issue 1-4, pp. 1003-1012 / doi:10.1007/s00170-016-8762-6

9. Prediction of Crater Size in Drilling and Texturing by Pulsed Laser Ablation / E. Stathatos; G.-C. Vosniakos; D. Pantelis / Solid State Phenomena, Vol. 261, pp. 129-134 / doi:10.4028/www.scientific.net/SSP.261.129

10. On the Feasibility of Determining the Heat Transfer Coefficient in Casting Simulations by Genetic Algorithms / A.N. Vasileiou and G.-C. Vosniakos and D.I. Pantelis / Procedia Manufacturing, Vol. 11, pp. 509-516 / doi:10.1016/j.promfg.2017.07.144

11. Titanium Alloys Thin Sheet Welding with the Use of Concentrated Solar Energy / D.I. Pantelis; M. Kazasidis; P. N. Karakizis / Journal of Materials Engineering and Performance, Vol. 26 (12), pp. 5760-5768 / doi:10.1007/s11665-017-3049-0

12. The effect of the heat input energy on the tensile properties of the AH-40 fatigue crack arrester steel, welded by the use of the robotic metal-cored arc welding technique / D.I. Pantelis; M. Kazasidis / The International Journal of Advanced Manufacturing Technology, Vol. 93 (9-12), pp. 3967-3980 / doi:10.1007/s00170-017-0761-8

2016

1. Nickel/MWCNT-Al2O3 electrochemical co-deposition: Structural properties and mechanistic aspects / F. Giannopoulos; N. Chronopoulou; J. Bai; H. Zhao; D.I. Pantelis; E.A. Pavlatou; A.Karantonis / Electrochimica Acta, Vol. 207, pp. 76-86 / doi:10.1016/j.electacta.2016.04.162

2. Finite element analysis of composite-to-steel type of joint for marine industry / D. Burlović; A. Milat; M. Balunović; D. Frank; E.A. Kotsidis; I.G. Kouloukouras; N.G. Tsouvalis / Welding in the World, Vol. 60, Issue 5, pp. 859–867 / doi:10.1007/s40194-016-0343-7

3. Artificial optical radiation photobiological hazard in arc welding / G.A. Gourzoulidis; A. Achtipis; F.V. Topalis; M.E. Kazasidis; D. Pantelis; A. Markoulis; C. Kappas; C.A. Bourousis / Physica Medica, Vol. 32, Issue 8, pp. 981-986 / doi:10.1016/j.ejmp.2016.07.001

4. Dissimilar Friction Stir Welding Between 5083 and 6082 Al Alloys Reinforced With TiC Nanoparticles / D.A. Dragatogiannis; E.P. Koumoulos; I.A. Kartsonakis; D.I. Pantelis; P.N. Karakizis; C.A. Charitidis / Materials and Manufacturing Processes, Vol. 31, No 16, pp. 2101-2114 / doi:10.1080/10426914.2015.1103856

5. Anti-Wear TiC-Based Surface Layers Using Concentrated Solar Energy / A. Mourlas; P. Psyllaki; D. Pantelis / Key Engineering Materials, Vol. 674, pp. 296-301 / doi:10.4028/www.scientific.net/KEM.674.296

6. Microstructural Study and Mechanical Properties of Dissimilar Friction Stir Welded AA5083-H111 and AA6082-T6 Reinforced with SiC Nanoparticles / D.I. Pantelis; P.N. Karakizis; N.M. Daniolos; C.A. Charitidis; E.P. Koumoulos; D.A. Dragatogiannis / Materials and Manufacturing Processes, Vol. 31, No 3, pp. 264-274 / doi:10.1080/10426914.2015.1019095

2015

1. Experimental Fatigue Study of Composite Patch Repaired Steel Plates with Cracks / V.A. Karatzas; E.A. Kotsidis; N.G. Tsouvalis / Applied Composite Materials, Vol. 22, Issue 5, pp. 507–523 / doi:10.1007/s10443-014-9420-5

2. Microstructure and tribological behavior of copper and composite copper+alumina cold sprayed coatings for various alumina contents / K.I. Triantou; D.I. Pantelis; V. Guipont; M. Jeandin / Wear, Vol. 336, pp. 96-107 / doi:10.1016/j.wear.2015.05.003

3. Rapid evaluation of temperature distribution of coatings during atmospheric plasma sprayed process / Ch.I. Sarafoglou; E.E. Stathatos; D.I. Pantelis; G.–C. Vosniakos / International Journal of Surface Science and Engineering, Vol. 9, Issue 1, pp. 96-106 / doi:10.1504/IJSURFSE.2015.067042

2014

1. Hydrogen effect on a low carbon ferritic-bainitic pipeline steel / E.V. Chatzidouros; V.J. Papazoglou; D.I. Pantelis / International Journal of Hydrogen Energy, Vol. 39, No 32, pp. 18498-18505 / doi:10.1016/j.ijhydene.2014.09.029

2. A practical flow diagram for the solution of complex non-linear thermo-mechanical numerical models / D.G. Karalis; N.G. Tsouvalis; V.J. Papazoglou; D.I.Pantelis / Computational Materials Science, Vol. 95, pp. 288-301 / doi:10.1016/j.commatsci.2014.07.045

3. Evaluation of Barrier Properties of Antifouling Coatings on Naval Steel / E.D. Kiosidou; A. Karantonis; D.I. Pantelis / Chemical Engineering Transactions, Vol. 41, pp. 301-306 / doi:10.3303/CET1441051

4. A practical flow diagram for the solution of complex non-linear thermo-mechanical numerical models / D.G. Karalis; N.G. Tsouvalis; V.J. Papazoglou; D.I. Pantelis / Computational Materials Science, Vol. 95, pp. 288-301 / doi:10.1016/j.commatsci.2014.07.045

5. Determination of local heat transfer coefficients in precision castings by genetic optimisation aided by numerical simulation / A.N. Vasileiou, G.-C. Vosniakos, D.I. Pantelis / Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Vol. 229, Issue 4, pp. 735-750 / doi:10.1177/0954406214539468

6. From Transient to Permanent Phenomena during GMAW of a Thin-Walled Marine Aluminium Alloy / S.K. Chionopoulos; D.I. Pantelis / International Journal of Materials Science and Applications, Vol. 3, No. 2, pp. 58-69 / doi:10.11648/j.ijmsa.20140302.18

7. On the failure analysis of bondlines: Stress or energy based fracture criteria? / K. Anyfantis / Engineering Fracture Mechanics 126, pp. 108-125 / DOI: 10.1016/j.engfracmech.2014.04.024.

8. Characterizing and Modeling Brittle Bi-material Interfaces Subjected to Shear / K. Anyfantis, C. Berggreen / Applied Composite Materials 21(6), pp. 905-919 / DOI: 10.1007/s10443-014-9392-5

2013

1. Analysis of an adhesively bonded single lap joint subjected to eccentric loading / K.N. Anyfantis; N.G. Tsouvalis / International Journal of Adhesion and Adhesives, Vol. 41, pp. 41-49 / doi:10.1016/j.ijadhadh.2012.10.007

2. Determination of onset of plasticity (yielding) and comparison of local mechanical properties of friction stir welded aluminum alloys using the micro‐ and nano‐indentation techniques / E.P. Koumoulos; C.A. Charitidis; N.M. Daniolos; D.I. Pantelis / International Journal of Structural Integrity, Vol. 4, Issue 1, pp. 143-158 / doi:10.1108/17579861311303690

3. A 3D ductile constitutive mixed-mode model of cohesive elements for the finite element analysis of adhesive joints / K.N. Anyfantis; N.G. Tsouvalis / Journal of Adhesion Science and Technology, Vol. 27, No 10, pp. 1146-1178 / doi:10.1080/01694243.2012.735900

4. Loading and fracture response of CFRP-to-steel adhesively bonded joints with thick adherents – Part II: Numerical simulation / K.N. Anyfantis; N.G. Tsouvalis / Composite Structures, Vol. 96, pp. 858-868 / doi:10.1016/j.compstruct.2012.08.056

5. Loading and fracture response of CFRP-to-steel adhesively bonded joints with thick adherents – Part I: Experiments / K.N. Anyfantis; N.G. Tsouvalis / Composite Structures, Vol. 96, pp. 850-857 / doi:10.1016/j.compstruct.2012.08.060

2012

1. Shrinkage-based die design for drying ceramic parts / E. Stathatos; G.-C. Vosniakos; T. Giannakakis; D. Pantelis / Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 226, Issue 5, pp. 919-929 / doi:10.1177/0954405411434030

2. A novel traction–separation law for the prediction of the mixed mode response of ductile adhesive joints / K.N. Anyfantis; N.G. Tsouvalis / International Journal of Solids and Structures, Vol. 49, No 1, pp. 213-226 / doi:10.1016/j.ijsolstr.2011.10.001

3. Failure analysis of a rock anchor made of stainless steel in marine environment / D.G. Karalis; N.E. Melanitis; D.I. Pantelis / Engineering Failure Analysis, Vol. 19, pp. 123-130 / doi:10.1016/j.engfailanal.2011.09.011

4. Post Buckling Progressive Failure Analysis of Composite Laminated Stiffened Panels / K.N. Anyfantis; N.G. Tsouvalis / Applied Composite Materials, Vol. 19, No 3, pp. 219-236 / doi:10.1007/s10443-011-9191-1

5. Finite element predictions of composite-to-metal bonded joints with ductile adhesive materials / K. Anyfantis / Composite Structures 94(8), pp. 2632-2639 / DOI: 10.1016/j.compstruct.2012.03.002.

2011

1. Determination of the fracture process zone under Mode I fracture in glass fiber composites / N.G. Tsouvalis; K.N. Anyfantis / Journal of Composite Materials, Vol. 46, Issue 1, pp. 27-41 / doi:10.1177/0021998311401934

2. Nanomechanical properties of friction stir welded AA6082-T6 aluminum alloy / E.P. Koumoulos; C.A. Charitidis; N.M. Daniolos; D.I. Pantelis / Materials Science and Engineering: B - 7th International Conference on Nanosciences and Nanotechnologies (NN10), Vol. 176, No 19, pp. 1585-1589 / doi:10.1016/j.mseb.2011.01.015

3. Experimental and numerical investigation of Mode II fracture in fibrous reinforced composites / K.N. Anyfantis; N.G. Tsouvalis / Journal of Reinforced Plastics and Composites, Vol. 30, No 6, pp. 473-487 / doi:10.1177/0731684410397682

4. Hydrogen effect on fracture toughness of pipeline steel welds, with in situ hydrogen charging / E.V. Chatzidouros; V.J. Papazoglou; T.E. Tsiourva; D.I. Pantelis / International Journal of Hydrogen Energy, Vol. 36, No 19, pp. 12626-12643 / doi:10.1016/j.ijhydene.2011.06.140

5. An Investigation of the Tensile Strength of a Composite-To-Metal Adhesive Joint / N.G. Tsouvalis; V.A. Karatzas / Applied Composite Materials, Vol. 18, No 2, pp. 149-163 / doi:10.1007/s10443-010-9137-z

6. Complete investigation of austenitic stainless steel multi-pass welding / A.P. Kyriakongonas; V.J. Papazoglou; D.I. Pantelis / Ships and Offshore Structures, Vol. 6, No 1-2, pp. 127-144 / doi:10.1080/17445302.2010.511833

7. Application of Ultrasonic C-Scan Techniques for Tracing Defects in Laminated Composite Materials / Th. Hasiotis; E. Badogiannis; N.G. Tsouvalis / Journal of Mechanical Engineering, Vol. 57, No 3, pp. 192-203 / doi:10.5545/sv-jme.2010.170

8. Fabrication, testing and analysis of steel/composite DLS adhesive joints / S. Hashim; C. Berggreen; N. Tsouvalis; D. McGeorge; I. Chirica; P. Moore; S. Boyd; J. Nisar; K. Anyfantis; K. Misirlis; E. Juin; B. Hayman, R. Dow; A. Orsolini / Ships and Offshore Structures,
Vol. 6, No 1-2, pp. 115-126 / doi:10.1080/17445302.2010.522019

9. Buckling strength parametric study of composite laminated plates with delaminations / N.G. Tsouvalis; G.S. Garganidis / Ships and Offshore Structures, Vol. 6, No 1-2, pp. 93-104 / doi:10.1080/17445301003776217

10. Studies of the buckling of composite plates in compression / B. Hayman; C. Berggreen; C. Lundsgaard-Larsen; A. Delarche; H. Toftegaard; R.S. Dow; J. Downes; K. Misirlis; N. Tsouvalis; C. Douka / Ships and Offshore Structures, Vol. 6, No 1-2, pp. 81-92 / doi:10.1080/17445302.2010.528283

2010

1. Transient stress of steel phase transformation and transformation-induced fatigue / D.G. Karalis; D.I. Pantelis; V.J. Papazoglou / Theoretical and Applied Fracture Mechanics, Vol. 54, Issue 1, pp. 37-43 / doi:10.1016/j.tafmec.2010.06.013

2. Microstructural Study of Copper and Copper/Alumina Composite Coatings Produced by Cold Spray Process / D. Pantelis; K. Triantou; C. Sarafoglou; D. Christoulis; F. Borit; V. Guipont; M. Jeandin / Advanced Materials Research, Vols. 89-91, pp. 556-561 / doi:10.4028/www.scientific.net/AMR.89-91.556

2009

1. Experimental and numerical study of the fatigue behaviour of composite patch reinforced cracked steel plates / N.G. Tsouvalis; L.S. Mirisiotis; D.N. Dimou / International Journal of Fatigue, Vol. 31, No 10, pp. 1613-1627 / doi:10.1016/j.ijfatigue.2009.04.006

2. The scope of artificial neural network metamodels for precision casting process planning / G.-C. Vosniakos; V. Galiotou; D. Pantelis; P. Benardos; P. Pavlou / Robotics and Computer-Integrated Manufacturing, Vol. 25, Issue 6, pp. 909-916 / doi:10.1016/j.rcim.2009.04.018

3. Mechanical response of thin SMAW arc welded structures: Experimental and numerical investigation / D.G. Karalis; V.J. Papazoglou; D.I. Pantelis / Theoretical and Applied Fracture Mechanics, Vol. 51, Issue 2, pp. 87-94 / doi:10.1016/j.tafmec.2009.04.004

2008

1. Effect of substrate temperature and roughness on the solidification of copper plasma sprayed droplets / D.K. Christoulis; D.I. Pantelis; N. De Dave-Fabrègue; F. Borit; V. Guipont; M. Jeandin / Materials Science and Engineering: A, Vol. 485, Issue 1, pp. 119-129 / doi:10.1016/j.msea.2007.07.059

2. Experimental Investigation of Strain Concentrations Caused by Inserts in Sandwich Beams / N.G. Tsouvalis; M.J. Kollarini / Strain, Vol. 44, No 4, pp. 317-326 / doi:10.1111/j.1475-1305.2007.00369.x

3. Experimental Investigation of the Static Behaviour of a Hole Drilled Steel Plate Reinforced With a Composite Patch / N.G. Tsouvalis; L.S. Mirisiotis / Strain, Vol. 44, Issue 2, pp. 133-140 / doi:10.1111/j.1475-1305.2007.00337.x

4. Neural surface roughness models of CNC machined Glass Fibre Reinforced Composites / S. Alexandrakis; P. Benardos; G.-C. Vosniakos; N. Tsouvalis / International Journal of Materials and Product Technology (IJMPT), Vol. 32, No 2/3, pp. 276-294 / doi:10.1504/IJMPT.2008.018986

5. Parametric study on laser nitriding of 1.5919 steel / P.P. Psyllaki; A. Griniari; D.I. Pantelis / Journal of Materials Processing Technology, Vol. 195, Issue 1, pp. 299-304 / doi:10.1016/j.jmatprotec.2007.05.023

2007

1. Study of Al2O3 coatings on AISI 316 stainless steel obtained by controlled atmosphere plasma spraying (CAPS) / Ch.I. Sarafoglou; D.I. Pantelis; S. Beauvais; M. Jeandin / Surface and Coatings Technology, Vol. 202, Issue 1, pp. 155-161 / doi:10.1016/j.surfcoat.2007.05.021

2. A method for optimizing process parameters in layer-based rapid prototyping / G.-C. Vosniakos; T. Maroulis; D. Pantelis / Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 221, Issue 8, pp. 1329-1340 / doi:10.1243/09544054JEM815

3. A holistic approach to the exploitation of simulation in solid investment casting / N. Pagratis; N. Karagiannis; G.-C. Vosniakos; D. Pantelis; P. Benardos / Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 221, No 6, pp. 967-979 / doi:10.1243/09544054JEM465

4. Tribological properties of atmospheric plasma sprayed Cr2O3 coatings: effect of NiAl bond coating / D.I. Pantelis; C.I. Sarafoglou; N.P. Petsas; S.N. Economou; M.K. Vardavoulias / Surface Engineering, Vol. 23, No 3, pp. 201-208 / doi:10.1179/174329407X174399

2006

1. Effect of substrate preparation on flattening of plasma sprayed aluminium bronze powders / D. K. Christoulis and D. I. Pantelis and F. Borit and V. Guipont and M. Jeandin / Surface Engineering, Vol. 22, No 6, pp. 420-431 / doi:10.1179/174329406X150440

2005

1. Surface alloying of pre-deposited molybdenum-based powder on 304L stainless steel using concentrated solar energy / D.I. Pantelis; A. Griniari; Ch. Sarafoglou / Solar Energy Materials and Solar Cells, Vol. 89, Issue 1, pp.1-11 / doi:10.1016/j.solmat.2004.11.017

2. On the investigation of 7075 aluminum alloy welding using concentrated solar energy / D.G. Karalis; D.I. Pantelis; V.J. Papazoglou / Solar Energy Materials and Solar Cells, Vol. 86, Issue 2, pp. 145-163 / doi:10.1016/j.solmat.2004.07.007

3. Approximate solutions for the evaluation of the depth of laser-melted zones / K.N. Vonatsos; D.I. Pantelis / Applied Physics A, Vol. 80, No 4, pp. 885-889 / doi:10.1007/s00339-003-2339-6

2004

1. Design Buckling Curves for Clamped Orthotropic Laminated Plates / N.G. Tsouvalis; V.J. Papazoglou / Advanced Composites Letters, Vol. 13 (5), pp. 227-235

2003

1. Artificial Neural Network models for quality control of CNC machined glass fibre reinforced composites / S. Alexandrakis; P. Benardos; G.-C. Vosniakos; N. Tsouvalis / Machine Engineering, Vol. 3, No 1-2, pp. 139-149

2. The effect of geometric imperfections on the buckling behaviour of composite laminated cylinders under external hydrostatic pressure / N.G. Tsouvalis; A.A. Zafeiratou; V.J. Papazoglou / Composites Part B: Engineering, Vol. 34, No 3, pp. 217-226 / doi:10.1016/S1359-8368(02)00106-3

2002

1. Wear and corrosion resistance of laser surface hardened structural steel / D.I. Pantelis; E. Bouyiouri; N. Kouloumbi; P. Vassiliou; A. Koutsomichalis / Surface and Coatings Technology, Vol. 161, Issue 2, pp. 125-134 / doi:10.1016/S0257-8972(02)00495-4

2. A Parametric Study of the Effect of Geometric Imperfections on Buckling Behaviour of Composite Laminated Cylinders / A.S. Petreli; N.G. Tsouvalis / Advanced Composites Letters, Vol. 11, No 3, pp. 111-122

3. Surface alloying on cast iron using concentrated solar energy [Production d'un alliage superficiel sur la fonte à l'aide de l'énergie solaire concentrée] / D.I. Pantelis; P. Psyllaki; Ch. Sarafoglou / Fonderie-Fondeur d'Aujourd'hui, No 211, pp. 23-33

2001

1. Numerical modeling of composite laminated cylinders in compression using a novel imperfections modeling method / N.G. Tsouvalis; A.A. Zafeiratou; V.J. Papazoglou; N.C Gabrielides; P.D Kaklis / Composites Part B: Engineering, Vol. 32, Issue 5, pp. 387-399 / doi:10.1016/S1359-8368(01)00023-3

2. Microstructure and wear mechanisms of thermal-sprayed alumina coatings / P.P. Psyllaki; M. Jeandin; D.I. Pantelis / Materials Letters, Vol. 47, Issue 1, pp. 77-82 / doi:10.1016/S0167-577X(00)00215-9

2000

1. Pin-on-disc testing of PE-CVD diamond-like carbon coatings on tool steel substrates / P.P. Psyllaki; M. Jeandin; D.I. Pantelis; M. Allouard / Surface and Coatings Technology, Vol. 130, Issue 2, pp. 297-303 / doi:10.1016/S0257-8972(00)00711-8

2. Tribological behaviour of plasma-sprayed Al2O3 coatings under severe wear conditions / D.I. Pantelis; P. Psyllaki; N. Alexopoulos / Wear, Vol. 237, Issue 2, pp. 197-204 / doi:10.1016/S0043-1648(99)00324-5

1998

1. Development and experimental validation of analytical thermal models for the evaluation of the depth of laser-treated zones / D.I. Pantelis; K.N. Vonatsos / Applied Physics A, Vol. 67, No 4, pp. 435--439 / doi:10.1007/s003390050800

2. Investigation Into Application of Electrodischarge Machining as Steel Surface Modification Technique / D.I. Pantelis; N.M. Vaxevanidis; A.E. Houndri; P. Dumas; M. Jeandin / Surface Engineering, Vol. 14, No 1, pp. 55-61 / doi:10.1179/sur.1998.14.1.55

1997

1. A Computer Aided Ship Design System / T. Loukakis; L. Bardis; J. Ioannidis; V. Papazoglou; P. Kaklis; G. Grigoropoulos; G. Politis; K. Belibasakis; N. Tsouvalis / Technica Chronica, Vol. 17, No 1, pp. 31-44 (in Greek) and pp. 45-49 (extended summary in English)

2. Wear behavior of anti-galling surface textured gray cast iron using pulsed-CO2 laser treatment / D.I. Pantelis; G. Pantazopoulos; S.S. Antoniou / Wear, Vol. 205, Issue 1, pp. 178-185 / doi:10.1016/S0043-1648(96)07339-5

3. Etude microstructurale et mécanique d’assemblages brasés nitrure de silicium/fonte à graphite sphéroïdal (Microstructural and mechanical study of silicon nitride ductile cast iron brazed joints) / I. Kyriopoulou; N. Buiron; C. Prioul, D.I. Pantelis; V. Michaud / La Revue de Métallurgie-CIT/Science et Génie des Matériaux, Février 1997, pp. 227-239

4. Effect of the excimer laser surface treatment on ion-plated thin Mn-coating on steel substrate / D.I. Pantelis; G. Pantazopoulos / La Metallurgia Italiana, Vol. 89 (5), pp. 37-40

1996

1. Large deflection dynamic response of composite laminated plates under lateral loads / N.G. Tsouvalis; V.J. Papazoglou / Marine Structures, Vol. 9, Issue 9, pp. 825-848 / doi:10.1016/0951-8339(95)00048-8

2. A non-destructive evaluation of the material properties of a composite laminated plate / V.J. Papazoglou; N.G. Tsouvalis, A.G. Lazaridis / Applied Composite Materials, Vol. 3, No 5, pp. 321-334 / doi:10.1007/BF00134974

3. Excimer Laser Micromachining of CMSX2 and TA6V Alloys / D. Pantelis; P. Psyllaki / Materials and Manufacturing Processes, Vol. 11, No 2, pp. 271-282 / doi:10.1080/10426919608947480

4. Manufacturing and microstructural aspects of CO2-laser processed YBa2Cu3O7-δ superconductors / D.I. Pantelis; G. Pantazopoulos / Physica C: Superconductivity, Vol. 265, Issue 3, pp. 341-352 / doi:10.1016/0921-4534(96)00335-8

5. Fabrication of multi-layered steel/superconductive ceramic (Y-Ba-K-Cu-O)/silver rods by explosive powder compaction and extrusion / A.G. Mamalis; A. Szalay; D.I. Pantelis; G. Pantazopoulos; I. Kotsis; M. Enisz / Journal of Materials Processing Technology, Vol. 57, Issue 1, pp. 155-163 / doi:10.1016/0924-0136(95)02062-4

6. Net shape manufacturing of silver-sheathed high- superconductive ceramic (Y-Ba-K-Cu-O) strip by explosive compaction/cladding and rolling / A.G. Mamalis; A. Szalay; D. Pantelis; G. Pantazopoulos / Journal of Materials Processing Technology, Vol. 57, Issue 1, pp. 112-120 / doi:10.1016/0924-0136(95)02056-X

1995

1. Large deflection dynamic response of composite laminated plates under in-plane loads / V.J. Papazoglou; N.G. Tsouvalis / Composite Structures, Vol. 33, Issue 4, pp. 237-252 / doi:10.1016/0263-8223(95)00126-3

2. Excimer laser surface treatment of high-Tc superconductive ceramic layered plasma-sprayed silver plates / A.G. Mamalis; A. Szalay; D.I. Pantelis; G. Pantazopoulos; I. Kotsis; M. Enisz / Superconductor Science and Technology, Vol. 8, No 6, pp. 470-475 / doi:10.1088/0953-2048/8/6/013

3. Formation of wear resistant Al–SiC surface composite by laser melt–particle injection process / D. Pantelis; A. Tissandier; P. Manolatos; P. Ponthiaux / Materials Science and Technology, Vol. 11, No 3, pp. 299-303 / doi:10.1179/mst.1995.11.3.299

1992

1. Buckling of unsymmetric laminates under linearly varying, biaxial in-plane loads, combined with shear / V.J. Papazoglou; N.G. Tsouvalis; G.D. Kyriakopoulos / Composite Structures, Vol. 20, Issue 3, pp. 155-163 / doi:10.1016/0263-8223(92)90022-5

1991

1. Design Curves for Specially Orthotropic Laminated Plates Under Combined In-Plane Loading / V.J. Papazoglou; N.G. Tsouvalis / Transactions of the Society of Naval Architects and Marine Engineers (SNAME), Vol. 99, pp. 377-403

2. Mechanical behaviour of bimodulus laminated plates / V.J. Papazoglou; N.G. Tsouvalis / Composite Structures, Vol. 17, Issue 1, pp. 1-22 / doi:10.1016/0263-8223(91)90057-6